Many audio mixer circuits have been
published but this this very simple audio mixer circuit uses only one
transistor. The base emitter junction of the transistor is biased by
the diodes D1 and D2.The signals to be mixed are directly coupled to
the base of Transistor. Each input lines are current limited by using a
10k Potensiometer . With the used component values the collector
current is around 1mA.
Skema Rangkaian Audio Mixer 3 Input- The circuit can be assembled on a Vero board.
- The circuit can be powered from 9-25V DC.
- of each channel can be set using Variable resistor 10k
Transistors in the following series is enabled as a source of constant flow. By providing input audio signal on the emitter, the voltage on the emitter will fluctuate, which will cause the collector voltage also fluctuates. The amount of frequency fluctuation is comparable with the frequency of the incoming audio signal.
Anda Sedang Membaca Artikel : Aneka Rangkaian
dengan judul "Skema Rangkaian Audio Mixer". Anda bisa bookmark halaman ini dengan URL https://hobbypusing.blogspot.com/2014/02/skema-rangkaian-audio-mixer.html.
ٱلْحَمْدُ لِلَّهِ رَبِّ
ٱلْعَٰلَمِين
DAFTAR ARTIKEL HOBBY PUSING
